CQR Piccolo Internal Sounder

[LordWaycrest]

Hi all,

I'm just wondering is it possible to wire this alarm up to a magnetic door contact and a key-switch isolator rather than wiring it up to a control panel like it is intended for?

Many thanks,
Lewis

 

[LordWaycrest]

This is the instructions manual with information about the wiring terminals

 

[sparkymarka]

What for a door alarm ? If so you will need either a relay or a normally open contact

 

[LordWaycrest]

What for a door alarm ? If so you will need either a relay or a normally open contact

If you mean one of those battery powered stick-on alarms, it's not good enough sadly.

We need an internal sounder wired up to door contacts and a key-switch insolator.

This is because we have children and this alarm is to let us know if someone's gone in/out of the building without us knowing.

 

[sparkymarka]

NO ....I Was asking if you was wanting to use it as a door alarm ....

 

[LordWaycrest]

NO ....I Was asking if you was wanting to use it as a door alarm ....

Oh sorry I did not read the message properly, yes I do.

What would I need to do in order to achieve this? Obviously an alarm (which I got) and door contacts

 

[LordWaycrest]

I'm still not sure what kind of relay I need, I got the internal sounder, the door contacts and the DC power supply, it's just a relay I'm having trouble finding.

Anyone got any suggestions?