Hi there - first time visitor!
I have installed a double dimmer to control upstairs and downstairs hall lights.
Have I done it right? I've wired it as follows (same for each set of lights):
Red wire to ~ symbol
Yellow (with red sheath) to L1
Blue to L2
The dimmer (400W) runs pretty hot - load being 10x40W upstairs, and 10x 40W downstairs.
I'd love to know if this is the correct wiring - with this being the third switch I've tried this with!
Many thanks
I have installed a double dimmer to control upstairs and downstairs hall lights.
Have I done it right? I've wired it as follows (same for each set of lights):
Red wire to ~ symbol
Yellow (with red sheath) to L1
Blue to L2
The dimmer (400W) runs pretty hot - load being 10x40W upstairs, and 10x 40W downstairs.
I'd love to know if this is the correct wiring - with this being the third switch I've tried this with!
Many thanks