Finding matching coving / cornice (one piece needs replacing)

Joined
17 Apr 2011
Messages
86
Reaction score
0
Location
UK
Country
United Kingdom
Hi all,

Need to replace a couple of pieces of coving. I have found what I need (below) but it is not in stock anywhere nearby (even if I travel a reasonable distance).

My question is, is any 135mm s profile coving going to be identical? Or does it need to be the same brand?

The two I've linked do look very very similar (if not identical) in the images

Thanks!
smile.gif


----------------

This is what I need:

http://www.diy.com/departments/gypro...m/35820_BQ.prd

But this is all I can find in stock:

http://www.homebase.co.uk/en/homebas...le---2m-457925
 
Sponsored Links
Joined
15 Jun 2012
Messages
2,948
Reaction score
445
Location
Southampton
Country
United Kingdom
You would be lucky to get a 100% match, instead of cutting the coving and joining vertically, cut the old coving and the new at a 45 degree angles,
join the coving and when set one can use filler over the cut and feather in to the difference in thickness`s of both pieces and sand down
 
Sponsored Links
Top