Finding matching coving / cornice (one piece needs replacing)

Joined
17 Apr 2011
Messages
86
Reaction score
0
Location
UK
Country
United Kingdom
Hi all,

Need to replace a couple of pieces of coving. I have found what I need (below) but it is not in stock anywhere nearby (even if I travel a reasonable distance).

My question is, is any 135mm s profile coving going to be identical? Or does it need to be the same brand?

The two I've linked do look very very similar (if not identical) in the images

Thanks!
smile.gif


----------------

This is what I need:

http://www.diy.com/departments/gypro...m/35820_BQ.prd

But this is all I can find in stock:

http://www.homebase.co.uk/en/homebas...le---2m-457925
 
Sponsored Links
You would be lucky to get a 100% match, instead of cutting the coving and joining vertically, cut the old coving and the new at a 45 degree angles,
join the coving and when set one can use filler over the cut and feather in to the difference in thickness`s of both pieces and sand down
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top