Hi Just got Hive 2 and need to install it
Vokera mynute 35HE system boiler
HW Tank with a single moterised valve
Single zone system
The Thermostat is old and has a live and switch live just seems to switch the valve I think I have a Y Plan with a Valve for either Hot water or Heating and Hotwater.
The thermostat dosent seem to do much except that.
I want to just unhook that both ends and put the hive thermostat there.
The Manual time I will leave and just put it on constant and let hive control the on off.
There is a plastic junction box in the boiler that is from the 3A Spur that connect the boiler and thermostat from there.
I found the Live and Switch live for the thermostat in the boiler and also the live from the 3A spur
Also found the Live and Switch live in the boiler
So I have Duel channel Connections
Do I connect
N - N
L - L (From the Junction box which connect to 3amp Fused Spur)?
1 HW Off - No Cable
2 CH Off - No Cable
3 HW On - new cable to Brown Cable (Swicthed Live )
4 Heating On - wire Connection to 2nd Black wire in Boiler Switch Live
Do I need a heating off connection ?
So the third pic is the thermostat wires
black is live
brown is switched live
The 1st Pic is the Cable from Jnk Box to the Boiler
The 2 black cables 1st one is live and send one is switched Live from the timer
Vokera mynute 35HE system boiler
HW Tank with a single moterised valve
Single zone system
The Thermostat is old and has a live and switch live just seems to switch the valve I think I have a Y Plan with a Valve for either Hot water or Heating and Hotwater.
The thermostat dosent seem to do much except that.
I want to just unhook that both ends and put the hive thermostat there.
The Manual time I will leave and just put it on constant and let hive control the on off.
There is a plastic junction box in the boiler that is from the 3A Spur that connect the boiler and thermostat from there.
I found the Live and Switch live for the thermostat in the boiler and also the live from the 3A spur
Also found the Live and Switch live in the boiler
So I have Duel channel Connections
Do I connect
N - N
L - L (From the Junction box which connect to 3amp Fused Spur)?
1 HW Off - No Cable
2 CH Off - No Cable
3 HW On - new cable to Brown Cable (Swicthed Live )
4 Heating On - wire Connection to 2nd Black wire in Boiler Switch Live
Do I need a heating off connection ?
So the third pic is the thermostat wires
black is live
brown is switched live
The 1st Pic is the Cable from Jnk Box to the Boiler
The 2 black cables 1st one is live and send one is switched Live from the timer