- Joined
- 2 Jan 2020
- Messages
- 1
- Reaction score
- 0
- Country
Hello all.
I'm looking to Install a Hive thermostat.
Currently I have a Potterton Promax Combi 28 HE A.
This is fed power from a nearby fused spur which is also feeding a Danfoss 103 mechanical timer. The timer has always been set to constant & the temperature is controlled by a Danfoss (model unknown) thermostat.
As far as I can tell, I can disconnect and remove the thermostat as it's replaced by the wireless one, and the timer is replaced by the Hive Receiver.
The wiring is slightly confusing for me - as you can see in the pictures, there are wires bridged on both the thermostat and the timer.
Just looking for some advice before I dive in and make an arse of it.
Thermostat:
https://ibb.co/7k5cSfN
Timer:
https://ibb.co/PrcBK33
Cheers!
I'm looking to Install a Hive thermostat.
Currently I have a Potterton Promax Combi 28 HE A.
This is fed power from a nearby fused spur which is also feeding a Danfoss 103 mechanical timer. The timer has always been set to constant & the temperature is controlled by a Danfoss (model unknown) thermostat.
As far as I can tell, I can disconnect and remove the thermostat as it's replaced by the wireless one, and the timer is replaced by the Hive Receiver.
The wiring is slightly confusing for me - as you can see in the pictures, there are wires bridged on both the thermostat and the timer.
Just looking for some advice before I dive in and make an arse of it.
Thermostat:
https://ibb.co/7k5cSfN
Timer:
https://ibb.co/PrcBK33
Cheers!