- Joined
- 20 Oct 2012
- Messages
- 10
- Reaction score
- 0
- Country
We are renovating our house and the wiring seems to be a total mess, probably done in part by the previous owner.
In order to help the electrician/keep costs down, I have traced out the excuse for a ring main (loads of spurs) and am going to run new 2.5mm T&E to the sockets so it is all ready to be connected by the spark.
Can you have a look at my rough circuit plans, current and proposed, and let me know if it is ok, as I'm a bit worried that I'll be over the max cable length.
The floor plan is less than 100m2, but with 2.6m ceiling height and cables running both through the attic down to sockets as well as under floor, will it be better to split the ring into 2?
Note: sockets are named by their position.
Blue and red sketches are current layout, green is proposed.
Cheers, Chris.
In order to help the electrician/keep costs down, I have traced out the excuse for a ring main (loads of spurs) and am going to run new 2.5mm T&E to the sockets so it is all ready to be connected by the spark.
Can you have a look at my rough circuit plans, current and proposed, and let me know if it is ok, as I'm a bit worried that I'll be over the max cable length.
The floor plan is less than 100m2, but with 2.6m ceiling height and cables running both through the attic down to sockets as well as under floor, will it be better to split the ring into 2?
Note: sockets are named by their position.
Blue and red sketches are current layout, green is proposed.
Cheers, Chris.