I have a light in my utility room that was working fine and has suddenly stopped working. It did not go off with a flash, the fuse board was not tripped and the bulbs are all ok. The wiring is as per the attached pic.
The double socket works ok so everythng in the series to this point must be fine. I have checked the following:
1. changed fuse on swicthed FCU - stil not work
2. checked connections in double socket, switched FCU and light fitting, all ok.
3. changed light fitting - nothing
4. changed cable from socket to FCU - still not work.
What else could it be? All I can think of is (a) problem with 1mm cable from switched FCU to light - this cable is visible (I removed it from conduit) and looks ok, or (b) problem with swicthed FCU itself?
Anyone think of anything else I can check?
The double socket works ok so everythng in the series to this point must be fine. I have checked the following:
1. changed fuse on swicthed FCU - stil not work
2. checked connections in double socket, switched FCU and light fitting, all ok.
3. changed light fitting - nothing
4. changed cable from socket to FCU - still not work.
What else could it be? All I can think of is (a) problem with 1mm cable from switched FCU to light - this cable is visible (I removed it from conduit) and looks ok, or (b) problem with swicthed FCU itself?
Anyone think of anything else I can check?