Low bar pressure glow worm 30c

[Olivia Hilton]

Hi! Please can someone give any tips on increasing the bar pressure? I can't find anything on the boiler version we have and I also can't find the loop that usually resolves this!

 

[Deleted member 267285]

Looks like yours may be capped off. Check on top of your boiler for the braided hose.

 

[ianmcd]

your boiler does not come with an in built filling loop, locate the cold water inlet and follow it and you will find the external filling loop

 

[Olivia Hilton]

I've attached a photo of what's above the boiler and following the cold water outlet I can only see alongside the boiler where the copper pipes are

 

[ianmcd]

can you see anything like this anywhere ?

 

[Deleted member 267285]

This is why I thought it might be capped off:

 

[Olivia Hilton]

No, I've tried to find it but nothing anywhere I can see/access :/

 

[ianmcd]

what is under neath the boiler ? is it a cupboard or unit or what ?

 

[Deleted member 267285]

Also check where there may have been an airing cupboard.

 

[Olivia Hilton]

It was in the airing cupboard! Thank youuu - both of you. I appreciate you taking the time to help!!

 

[ianmcd]

It was in the airing cupboard! Thank youuu - both of you. I appreciate you taking the time to help!!

when you say "was" can you access the pipes below there ? likely to be in there

 

[Deleted member 221031]

This is why I thought it might be capped off:

That’s the heating return filter behind that fitting

 

[Olivia Hilton]

It's still located in the airing cuoboard, I've managed to get it between 1-2 now