- Joined
- 7 Mar 2018
- Messages
- 11
- Reaction score
- 1
- Country
Hi I have recently bought and installed a mini gen 4 accenta panel which came with a lcd keypad. I have installed 2 x Bosch pir blue line and 1 x external siren pyrnoix deltabell.
I have connected up the panel,keyad,pirs and the siren using the wiring provided. I have powered the system up today and it is saying 'tamper fault lockout' . Now I haven't linked the zones out which aren't been used should this be done.
The wiring is as follows
Keypad 13v red
0v black
Tamp yellow
Comms blue
Sound green
White spare
Pir ( each pir has its own cable wired back to panel )
- black
+ Red
Nc blue
Nc green
T yellow
White spare
Siren
T (link to -12v)
T yellow
Eng hold spare
STB green
Bell blue
+12v red
-12v black (link to top T)
Sounders were plugged in and none of the jumpers etc were moved
Now the panel :
Keypad:
Sound green
Comms blue
13v red
0v black
Top tamp yellow
Bottom tamp spare
Pir:
Both reds together and both blacks together to 13 and 0v respectively
Both yellows for tamp connected together and put in tamp terminal next to 13v
Blue - wired to zone 2
Green - wired to zone 2
The second pir was wired into zone 3 (blue and green)
Siren
Red - D (bell +)
Black - A (scb)
Yellow - T (scb)
Blue - B (bell -)
Green - strobe -
I hope someone could help me as this is my first alarm and would appreciate any feedback
Thank you.
I have connected up the panel,keyad,pirs and the siren using the wiring provided. I have powered the system up today and it is saying 'tamper fault lockout' . Now I haven't linked the zones out which aren't been used should this be done.
The wiring is as follows
Keypad 13v red
0v black
Tamp yellow
Comms blue
Sound green
White spare
Pir ( each pir has its own cable wired back to panel )
- black
+ Red
Nc blue
Nc green
T yellow
White spare
Siren
T (link to -12v)
T yellow
Eng hold spare
STB green
Bell blue
+12v red
-12v black (link to top T)
Sounders were plugged in and none of the jumpers etc were moved
Now the panel :
Keypad:
Sound green
Comms blue
13v red
0v black
Top tamp yellow
Bottom tamp spare
Pir:
Both reds together and both blacks together to 13 and 0v respectively
Both yellows for tamp connected together and put in tamp terminal next to 13v
Blue - wired to zone 2
Green - wired to zone 2
The second pir was wired into zone 3 (blue and green)
Siren
Red - D (bell +)
Black - A (scb)
Yellow - T (scb)
Blue - B (bell -)
Green - strobe -
I hope someone could help me as this is my first alarm and would appreciate any feedback
Thank you.