Outhouse building limits

Joined
28 Oct 2026
Messages
4
Reaction score
0
Country
United Kingdom
Hi, i was wondering is the 30m squared limit for building an outbuilding without planning permission for the internal or external space, if so i've heard the limit is for the internal space so say it's i don't know 36 m squard external but 30m squared internal that would be fine right? Thanks
 
Planning permission and building regulations are different things.

You have to meet the planning permission rules for permitted building.

One rule is..
If the building is within 2 metres of any garden boundary and hight is under 2.5.

The size you mentioned is also related to garden size as has to be under 50%
There are others rules.
Look them up.
See if you qualify. Probably need to pay for advice imo.
 
It's the internal dimension. But proximity to your boundary is key as per above. Also there are fire resistant requirements you need to comply with.
 
Planning permission and building regulations are different things.

You have to meet the planning permission rules for permitted building.

One rule is..
If the building is within 2 metres of any garden boundary and hight is under 2.5.

The size you mentioned is also related to garden size as has to be under 50%
There are others rules.
Look them up.
See if you qualify. Probably need to pay for advice imo.
Hi , i see. For sure. Thanks
 
It's the internal dimension. But proximity to your boundary is key as per above. Also there are fire resistant requirements you need to comply with.
That's good then. Oh yh will be brick and block
 
Also , i forgot to mention that my garden isnt straight so one side will be longer then the other so when measuring to make sure i don't pass the 30m squared internal limit do i measure the longest length and the longest width to find the area or measure the longest and shortest and divide them by 2 amd work out the area this way?
 
neither will get you the area. An AI will help if you draw all the sides and lengths.
 
I built a permitted development outbuilding, got the walls up then realised it would look horrible with a flat roof. So I applied for permission to double it in size and add a pitched roof over the lot. Did the drawings myself, filled the form in. All approved, cost under £400.

So don't tie yourself in knots or build something other than you'd like just to stick within PD. The system is there for us all to use, you don't need a fancy architect. I used CAD, but I've seen other approved applications with a biro sketch, it's not a problem as long as some dimensions are included on it. If you miss anything they need then they'll just ask you to add it.
 
Back
Top