After reading up on various regulations, their does not appear to be any reason why a competent DIY person can not carry out the relevant preparation works and replace their own boiler. the Gas conection, commissioning along with the flue installation will however have to be carried out by a Gas Safe registered person
In my case I intend replacing the existing floor mounted boiler from a pumped heat and gravity fed hot water system with a Vaillant 630 wall mounted system boiler which i believe will be relatively strait forward
Any reason why a competent DIY person should not carry out this work or advise on any tips
In my case I intend replacing the existing floor mounted boiler from a pumped heat and gravity fed hot water system with a Vaillant 630 wall mounted system boiler which i believe will be relatively strait forward
Any reason why a competent DIY person should not carry out this work or advise on any tips
