Pyronix Enforcer Keypad Menu (display blank)

Joined
16 Mar 2013
Messages
17
Reaction score
2
Location
West Midlands
Country
United Kingdom
Exploring my Enforcer I came across the Key Pad Menu..

The menu goes like this:

Language
Zone Status
Keyclick Vol
Master Vol
Tag ID
Factory Reset(----)
Backlight Force
PA/Fire Timer
Address (00)

I was trying to factory reset the system so I could set this up from scratch.

I entered the Factory Reset (----) and entered 2000.

I had the shock of my life when the siren alarmed, I could not get it to stop, after around 5mins it stopped by itself.

I found I could not get out of the Key Pad Menu no matter what buttons I pressed, unfortunately I have changed something in that menu and I've lost all the characters on my display, the backlight is fine, all buttons beep, but no characters, numbers or writing is displayed.

I'm struggling to find any user manual for the key pad menu.

Any help appreciated.
 

Attachments

  • 20191203_153816.jpg
    20191203_153816.jpg
    125.7 KB · Views: 576
Sponsored Links
Press D enter 2000 and make sure he keypad address is 00 then press A
 
Press D enter 2000 and make sure he keypad address is 00 then press A

Absolutely spot on. The back light is on with no writing or digits, once D is pressed and held for 5 seconds 'Enter Security Code' which I entered 2000 and just like magic 'Address (01)' pops up and changed to (00) and were back up and running!!

Thank so much!
 
Hi I couldn’t put my pyronix house alarm on last night because of wireless poll fail can anyone advise?
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top