Hi,
I have the above boiler, and although it works, it has a fault. When the setting dial for the heating is set to full or 3/4, there is no problem. When it is set to 1/2 or below, the fan clicks on, the flame lights for perhaps 2 seconds, then the boiler shuts down for 5 seconds, then the cycle starts again and again and again with a lot of clicking from the relays. Not perfect, but as we are not without heating, not a huge problem. I was just wondering whether anyone knew why it would be acting like this? Pressure is between 1 and 1 1/2 bar.
Many thanks in advance.
James
Edited to add. Once whilst going through it's cycle, the boiler stopped completely, leaving just the power light on, the lcd display on, and the indicator light above the heating control flashing slowly. I reset the panel, and everything then fired up ok.
I have the above boiler, and although it works, it has a fault. When the setting dial for the heating is set to full or 3/4, there is no problem. When it is set to 1/2 or below, the fan clicks on, the flame lights for perhaps 2 seconds, then the boiler shuts down for 5 seconds, then the cycle starts again and again and again with a lot of clicking from the relays. Not perfect, but as we are not without heating, not a huge problem. I was just wondering whether anyone knew why it would be acting like this? Pressure is between 1 and 1 1/2 bar.
Many thanks in advance.
James
Edited to add. Once whilst going through it's cycle, the boiler stopped completely, leaving just the power light on, the lcd display on, and the indicator light above the heating control flashing slowly. I reset the panel, and everything then fired up ok.