- Joined
- 22 Oct 2007
- Messages
- 130
- Reaction score
- 0
- Country
I'm replacing my toilet, currently its a low level WC with S bend, the soil pipe rises out of a concrete floor.
Currently I have a 5" (approx-if anyone can remember the standard sizes and even better the internal diameter that would be great!) pitchfibre pipe that protrudes about 30mm from the floor, it gets wider as it leaves the floor, I assume this would be to accept another length of pipe.
The S bend of the current toilet is sunk into the pipe, and the 10mm gap filled with what looks like cement. The plan is to cut the pipe flush with the floor, and install a new toilet using a 90 degree swanneck pan connector.
Are there any adaptors available to fit the pan connector into the pitchfibre pipe? This is doing my head in! If there isn't anything available has anyone got any ideas for a decent bodge?
If this sounds familiar, you'll have seen my previous thread, apologies for the repost but there were several Q's in the original which have now been resolved, but this issue remains.
Currently I have a 5" (approx-if anyone can remember the standard sizes and even better the internal diameter that would be great!) pitchfibre pipe that protrudes about 30mm from the floor, it gets wider as it leaves the floor, I assume this would be to accept another length of pipe.
The S bend of the current toilet is sunk into the pipe, and the 10mm gap filled with what looks like cement. The plan is to cut the pipe flush with the floor, and install a new toilet using a 90 degree swanneck pan connector.
Are there any adaptors available to fit the pan connector into the pitchfibre pipe? This is doing my head in! If there isn't anything available has anyone got any ideas for a decent bodge?
If this sounds familiar, you'll have seen my previous thread, apologies for the repost but there were several Q's in the original which have now been resolved, but this issue remains.