Remove socket without blanking plate

[monty1982]

I have 3 sockets in a line in my room and would like to remove the middle one. Is it acceptable to connect its wires with wagos, put these in a wagobox, and use expanding foam to fill the cavity and polyfill over?

 

[SUNRAY]

no You must not bury live wago joins in plaster. Is it possible to pull in a new length of cable?

 

[sparkwright]

It is also very possible that removing that socket may create wiring not in a safe zone - meaning it could get drilled through by someone unsuspecting.

 

[SUNRAY]

It is also very possible that removing that socket may create wiring not in a safe zone - meaning it could get drilled through by someone unsuspecting.

I'd assumed 3 in a row meant a straight row, however seing some domestic properties and the way they have developed it's a good call.

 

[sparkwright]

I'd assumed 3 in a row meant a straight row, however seing some domestic properties and the way they have developed it's a good call.

The sockets could be in a horizontal row, but the wiring may go up and down.

 

[SUNRAY]

The sockets could be in a horizontal row, but the wiring may go up and down.

yep totally, in fact I can straightaway think of a couple of situations like that.