- Joined
- 25 Jan 2022
- Messages
- 5
- Reaction score
- 0
- Country
Hi,
I'd like to replace the below with something new and digital. The dial is so insensitive it is impossible to set a temperature, you can tap it (not moving the dial) and it will come on/go off depending on the state it was in. If I set it to 20 degrees I think it actually ranges from 18 to 25 so I'm forever moving it 1/1000th of a mm in either direction.
We knocked down a wall that it was on and it had to be repositioned somewhere less than ideal, kind of now stuck up in a corner.
Ideally I want a remote sensor I can put in the middle of the room and it feed back the actual room temperature to the thermostat. Failing that, just something that is more sensitive/accurate on the dial (or digital).
All this does is turn on ceiling heating. It is not connected to a boiler or anything else. I believe it is 240V so perhaps that limits my choice.
Many thanks in advance!
I'd like to replace the below with something new and digital. The dial is so insensitive it is impossible to set a temperature, you can tap it (not moving the dial) and it will come on/go off depending on the state it was in. If I set it to 20 degrees I think it actually ranges from 18 to 25 so I'm forever moving it 1/1000th of a mm in either direction.
We knocked down a wall that it was on and it had to be repositioned somewhere less than ideal, kind of now stuck up in a corner.
Ideally I want a remote sensor I can put in the middle of the room and it feed back the actual room temperature to the thermostat. Failing that, just something that is more sensitive/accurate on the dial (or digital).
All this does is turn on ceiling heating. It is not connected to a boiler or anything else. I believe it is 240V so perhaps that limits my choice.
Many thanks in advance!