Whenever a ceiling rose needs to be replaced with a light fitting it always seems to end up as a half sloppy job.
Light fittings never seem to have the same fixing centres and almost never have adequate room for tidy connections.
I usually end up turning a suitable wooden pattress on a lathe but it can be a bit of a pain as they all end up different sizes.
Is there any kit on the market for this job ?
Bernard
Light fittings never seem to have the same fixing centres and almost never have adequate room for tidy connections.
I usually end up turning a suitable wooden pattress on a lathe but it can be a bit of a pain as they all end up different sizes.
Is there any kit on the market for this job ?
Bernard