scrap copper and brass

most of the copper is off cuts from pipes as i was working as a gas fitter and the brass is all nuts bolts and old valves
 
round crawley way its 1800 a ton for off cuts soldered elbows and cylinders etc
 
it hasnt just knackered and put this note in the wrong section. wud prefer answer to aps question though cheers
 
I just got £3.10 p/Kg for some "bright" copper from SWA cable.
"normal" copper was £2.80 p/Kg.

All the local scrappies were the same price.
 
I have a bunch of scrap copper from installing a new boiler and reworking some pipework, going to take it to the scrappy soon, with the old water tank, do I need to strip off the foam cladding or do they take it as is?

Dave.
 
I have a bunch of scrap copper from installing a new boiler and reworking some pipework, going to take it to the scrappy soon, with the old water tank, do I need to strip off the foam cladding or do they take it as is?

Dave.

Better off getting the foam off :)
 
Back
Top