SIEMENS STRATUM 200 CONSUMER UNIT (10years old)

[lee p]

HELP REQUIRED.

Does anyone know where I can get hold of stock for the above board?

I need to upgrade it by split loading it with a kit and an RCD. Would prefer to use Siemens, but if there is a manufacturers components that fit the board I will do that instead.

OR the alternative will be a new board.

Would rather do the upgrade than a new board.

Any info gratefully received.

Thanks

Lee

 

[securespark]

Here??

http://www.thefusecompany.com

 

[Lectrician]

Siemens no longer manufacture, but the earlier MK are identical.

Some companies may stock old stock - try the above link.

 

[lee p]

Thanks for the help looks like a new board is the only way round this. The rcd's aren't available so individual rcbo's would work out at £150 plus.

 

[securespark]

 

[plugwash]

does it have two neutral bars? thats a prerequisite for split load conversion.

assuming it does one option could be to remove all the breakers and bussbars and rebuild it using modern MK (or other brand that uses bussbars that are only mounted by the terminals they are in) components throughout.

It would likely be as expensive as replacing the board but it could well be less work and would certainly be less disruptive to the decor.