- Joined
- 30 May 2016
- Messages
- 23
- Reaction score
- 0
- Country
Installed a sink cabinet but the top drawer is colliding with the waste pipe from the sink. Has been an absolute nightmare, and every combination of pipes used had some form of leak. This configuration is finally working and I don't want to have to change the pipes again if possible.
Does anyone have any alternative suggestions regarding any neat/tidy modifications I could make to the drawer to make this fit? It's only overlapping by about 3cm.
Does anyone have any alternative suggestions regarding any neat/tidy modifications I could make to the drawer to make this fit? It's only overlapping by about 3cm.