the timber is small just over 1" x 1x3/4 about 1/3 the 3x2" i have used
the roof wont have a structure just maybe 2 ends and 1 a frame so minimal support
floor is thin as is the roof
8 and 10mm are very very poor a description off "good strength "is in my eyes is beyond sense both material are far too thin
the roof wont have a structure just maybe 2 ends and 1 a frame so minimal support
floor is thin as is the roof
in my humble opinion you get what you pay forThe roof and floor are made from 8mm and 10mm sheet material respectively. This board provides good strength,
8 and 10mm are very very poor a description off "good strength "is in my eyes is beyond sense both material are far too thin