Testing Reillo G3B Metron Solenoid Coil

Joined
3 Nov 2009
Messages
49
Reaction score
0
Country
United Kingdom
Can anyone tell me how can i test a solenoid coil of a riello G3B burner to see if it is working, this coil has 3 wires blue, black, brown. i tested for continunity with my multi meter between blue and black and i had continunity then i tested between blue and brown and i had no continunity so i am wondering is this coil faulty any advise on testing metron coils with multi meter :?: Thanks for reading
 
Sponsored Links
Joined
7 Feb 2008
Messages
23,634
Reaction score
4,698
Location
Northumberland
Country
United Kingdom
I'm certain that there should be continuity between blue and black, and blue and brown.....
Between blue and brown look for 1350 ohms, between blue and black, much less at 1.3 ohms.
John :)
PS I always keep these in stock.....!
 
Joined
9 Aug 2012
Messages
1
Reaction score
0
Country
United Kingdom
I'm certain that there should be continuity between blue and black, and blue and brown.....
Between blue and brown look for 1350 ohms, between blue and black, much less at 1.3 ohms.
John :)
PS I always keep these in stock.....!
 
Sponsored Links
Top