Testing Reillo G3B Metron Solenoid Coil

[ryan3]

Can anyone tell me how can i test a solenoid coil of a riello G3B burner to see if it is working, this coil has 3 wires blue, black, brown. i tested for continunity with my multi meter between blue and black and i had continunity then i tested between blue and brown and i had no continunity so i am wondering is this coil faulty any advise on testing metron coils with multi meter Thanks for reading

 

[Burnerman]

I'm certain that there should be continuity between blue and black, and blue and brown.....
Between blue and brown look for 1350 ohms, between blue and black, much less at 1.3 ohms.
John
PS I always keep these in stock.....!

 

[DANGLOBE]

I'm certain that there should be continuity between blue and black, and blue and brown.....
Between blue and brown look for 1350 ohms, between blue and black, much less at 1.3 ohms.
John
PS I always keep these in stock.....!