took off from meter and keeps going to alarm

[hasso]

its me again i went to my other house and found out the alarm aint working either anyway it a optima xl6 i switched it on the alarm went off i pressed 1234 and it worked i done a strobe test volume test anyway all that was fine i left it set for an hour and it was fine i unset it it was fine and then i left it on all night and it was fine and then today after work i decided to go and have a look at it and then i thought to ma self wot happens if i take the fuse out i took the fuse out and put it in again i pressed 1234 it went striaght to day then i decided to swtich it off from the meter box when i pressed off the alarm went off i quickly took it out of the fuse 10 mins later i put it back in again and know nothing happend just the bell box sounds and the power light stays on i pressed every button and nothing happens. can any one help me ?

 

[JohnD]

did you fit a new battery?

 

[hasso]

yes i did put a new battery well not new but got one from a diffrent alarm

 

[joe-90]

Have you check the PCB fuses?

 

[breezer]

still try a new battery

 

[hasso]

were can i find them

 

[Steve]

Maplin. I hear Yuasa are a good brand. Take the old one and ask the spotty kid there to get you a new one.

 

[breezer]

yuasa ARE the best

 

[securespark]

ask the spotty kid there to get you a new one.

Only Maplin in Donny has a spotty kid behind the counter.

 

[RF Lighting]

Leeds maplins does too

 

[breezer]

They all do, there is even a part number for him

 

[Tim 77]

They all do, there is even a part number for him

I couldn't find that part number in Nottingham, can I cross reference it with RS?