Veritas R8 alarm two tone beep fault

Sponsored Links
It is in the manual, i would use the engineers mode, but 41-47 are the basic event logs and pressing omit whilst in each will provide additional information.
 
Sponsored Links
Are you sure you haven’t turned chime on another zone or you have a faulty contact making it chime ? Turn off chime and see if you still get the noise
 
Are you sure you haven’t turned chime on another zone or you have a faulty contact making it chime ? Turn off chime and see if you still get the noise

Not turned chime on.

I have a contact on the back door but the system is unset? It's as if the panel is resetting itself
 
Chime works on unset ….
Press the musical note …a chime noise says it’s on
A error noise says it’s off
 
Depends on what chime was programmed on originally…..let’s just see if it does it now ….everything is a guess unless your there yourself
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top