Hi, I tried my immersion for the first time and it trips after 14 seconds each time I switch on! I have traced the power from the switch in the kitchen to the switch in the airing cupboard and on to the immersion head itself.
The live wire goes into the blue plastic covered unit (screw on right) and on from the screw on the leftthrough the white wire to a brass post sticking up from the base of the immersion heater head. there is power reaching this point.
Any ideas what the problem could be other than a fault with the immersion itself? It may never have been tested (not even at istallation some 4 years ago!)
The live wire goes into the blue plastic covered unit (screw on right) and on from the screw on the leftthrough the white wire to a brass post sticking up from the base of the immersion heater head. there is power reaching this point.
Any ideas what the problem could be other than a fault with the immersion itself? It may never have been tested (not even at istallation some 4 years ago!)