Afternoon,
I dont have any photos of wiring etc yet but you might be able to advise from what i am about to type.
Photo supplied is taken from internet but looks vey close to what is currently fitted.
There is also a short pull cord hanging down from it.
Heater ring element thickness looks about 6mm
........................
My neighbour has asked me to remove what is currently fitted & replace it with just a bathroom light as the heater ring element no longer works & looks old fashioned.
Currently there is a long pull cord just inside the bathroom for the light.
There is also a shorter pull cord next to it which changes the text message in its window from ON to OFF to isolate i assume.
There is a short pull cord hanging down from the light/heater etc
Can i then do this.
Remove wiring from isolation switch to old currently fitted light/heater.
With the isolation switch showing OFF then cut the short pull cord flush at the ceiling etc so it cant be operated.
Hopefully the wires left in the ceiling will allow me to connect to a new light.
Job now complete.
I dont have any photos of wiring etc yet but you might be able to advise from what i am about to type.
Photo supplied is taken from internet but looks vey close to what is currently fitted.
There is also a short pull cord hanging down from it.
Heater ring element thickness looks about 6mm
........................
My neighbour has asked me to remove what is currently fitted & replace it with just a bathroom light as the heater ring element no longer works & looks old fashioned.
Currently there is a long pull cord just inside the bathroom for the light.
There is also a shorter pull cord next to it which changes the text message in its window from ON to OFF to isolate i assume.
There is a short pull cord hanging down from the light/heater etc
Can i then do this.
Remove wiring from isolation switch to old currently fitted light/heater.
With the isolation switch showing OFF then cut the short pull cord flush at the ceiling etc so it cant be operated.
Hopefully the wires left in the ceiling will allow me to connect to a new light.
Job now complete.