Numatic NQS250 commercial has stopped working

Joined
22 Nov 2019
Messages
616
Reaction score
12
Country
United Kingdom
My commercial grade Numatic hoover has stopped working. I checked switch and capacitor and all seems working fine.

Machine was working and then stopped. With new fepa filter was under a bit of overloading but I only used for few minutes a time to use with wall chaser.

I do not see any other components apart the motor itself.

What should I check?
 
Sponsored Links
My Henry did the same thing after it cooled it reset, after several times it never reset again!(n)
You may get away with it once.
 
My Henry did the same thing after it cooled it reset, after several times it never reset again!(n)
You may get away with it once.

I got away once and second time completely died

Spoke with technical department at Numatic and they told me the motor has given up
 
Does the motor get a supply across the live & neutral when you switch on, if so it sounds like the tech dept were correct.
 
Sponsored Links
Does the motor get a supply across the live & neutral when you switch on, if so it sounds like the tech dept were correct.

Can you explain it in a more easy way. I did not get what you are saying. Apologise but not been my first language sometime I miss some bit. I can check and report back when I know what to do :)
 
If you mean the motor get the 240v at both end Live and neutral when I switch on. The answer is yes
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top