- Joined
- 17 Dec 2018
- Messages
- 529
- Reaction score
- 10
- Country
I get a gas certificate done annually.
9 times out of 10 the gas engineer will issue the certificate without issue.
However on the odd occasion, I will get gas engineer who says that my flue is less than the required 300mm from the opening.
When I mention this to the engineers that issue the certificate, they say that the ones who fail it either don't know how to correctly measure or are hoping i'd slide them some money under the table for a pass..
Is possible to obtain documentation from an authority (like Gas Safe) which clearly states that the flue is at least 300mm away from the opening?
Or what else can I do, without modifying my existing setup
9 times out of 10 the gas engineer will issue the certificate without issue.
However on the odd occasion, I will get gas engineer who says that my flue is less than the required 300mm from the opening.
When I mention this to the engineers that issue the certificate, they say that the ones who fail it either don't know how to correctly measure or are hoping i'd slide them some money under the table for a pass..
Is possible to obtain documentation from an authority (like Gas Safe) which clearly states that the flue is at least 300mm away from the opening?
Or what else can I do, without modifying my existing setup