Tiles fit down side of shower tray.

[Harison pailing]

Hi,

I'm redoing my ensuite and through an accumulation of a victorian plumbing shower tray being 890 instead of 900 advertised and my tiles being 6mm instead of 10.2mm like advertised the tiles slot down both sides of the tray. What can I do to get over this as I belive the tiles need to drop down onto the tray.

See attached photo.

Thanks!

 

[Deleted member 292770]

board over the board on the right.?

 

[Deleted member 292770]

thicker adhesive?

 

[Harison pailing]

thicker adhesive?

How thick can I go with adhesive?

 

[Deleted member 292770]

depends what adhesive you buy. you can easily get trade flexible adhesives go up to 20mm .
https://www.protilertools.co.uk/pro...MIzZGG_qzf9AIVhoxRCh3HxgM0EAQYAiABEgJNmPD_BwE
just an example.

 

[ktuludays]

I'd add another board on one side if it was me. It's all mechanically fixed so not too big a job. Slightly thicker adhesive and you're sorted.

 

[Harison pailing]

I'd add another board on one side if it was me. It's all mechanically fixed so not too big a job. Slightly thicker adhesive and you're sorted.

Thanks for the reply. I just plastered one side of the wall instead.

 

[abbadon]

Watch out that the new plaster doesnt strip mositure from the adhesive too fast - your tiles wont be properly fixed in that situation...