Try answering the OP's question rather than turning this forum into some jolly old boys club ... It's for DIY'ers AFAIA.
MW
The Op is a danger, if you had a clue you would know that.
I totally endorse your comment my friend
Try answering the OP's question rather than turning this forum into some jolly old boys club ... It's for DIY'ers AFAIA.
MW
The Op is a danger, if you had a clue you would know that.
Try answering the OP's question rather than turning this forum into some jolly old boys club ... It's for DIY'ers AFAIA.
You mean this site is now some jolly old boys club or its not for DIY'ers ... Which is it?Sorry no
So advise him how to use it safelyThe piece of kit that the op has, he clearly doesnt know how to use.
Errrmmm this once's quite simple WDIK ... He went out and bought it ... LEGALLY!Leads one to think how did it fall into his hands?
Firstly ... What do you mean "us all"?Coming on here and asking questions regarding how to use it makes us all feel uncomfortable.
Firstly ... What do you mean "us all"?
and secondly ... Fine, be uncomfortable and go and advise someone how to unblock their drains.
Don't, however, dictate to others on this forum who have been contributing far longer than you have ... What do you think gives you the right?
AFAIK this isn't yet some RGI advice centre ... Perhaps the Mods would care to comment and I will certainly be asking Admin to review the way this particular forum is being stage managed.
The situation of advising on gas related issues has been discussed many times before and my own take on it is that advice on how to proceed safely is better than no advice at all.
I don't feel at all uncomfortable BTW.
if not the OP will go and gas themselves
MW
Appearances are often deceptive ... Nothing to do with you I just don't agree with the content of some of the posts you've made today.It would appear mr mw that you seem to have me and everything i say in your sights tonight?
Oh I really wish that I did but ... Unfortunately not.You may achieve some sort of perverse pleasure from this?
That's twice you've posted this ... The last one was deleted, any bets on this oneHave you been checked resently for aspergers syndrome?
Possibly true but you still haven't answered my question.Your point about how long you have been using this site is purile, hollow vessels make the loudest noises
Oh dear Mr DIK you are getting upset ... Anyone without your bias would have seen thatdifficult as town gas which consisted primarily consisted of cabon monoxide was phased out during the 60's
try again
when you have an informative input other than trying to tell the op how to do a let bye test which had to be removed
feel free
was intended to be facetious and not actually seriousif not the OP will go and gas themselves
I did a tightness test with my digital manometer and my pressure off the U6 meter after stabilization was 26.70mb and had risen to 27.40mb after 2min test.
What pressure does the regulator lock-up on NG?
Is my meter regulator letting by, or have overlooked something?
Everything was turned off during tests.
Kane 425 tester, certificate 2 weeks old.
Please confine instruction on gas work to the Combustion Chamber. I haven't deleted anything in this thread.
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local