paint

What a good paint not peeling away with the heat for radiator copper pipe? i would need some white and maybe chrome for bathroom. Thanks

Hi all, Not sure if I'm in the right place but I'm in need of some help. I painted an external wall around 18 months ago. The wall is breeze block and rendered with sand/cement. The wall was painted with a thinned down white masonry paint as an undercoat and then it had 2 coats of vaspor...

Hey guys, First time poster here. We're looking for an eco- and, in particular, vegan-friendly paint for our lounge. We've done plenty of research and come across firms like Earthborn, Lakeland, Lick, Graphenstone and Little Greene. Graphenstone in particular appear to have some very impressive...

I have recently come into ownership of a Victorian terraced house on the south coast, with the front wall quite elevated and facing the sea (though at a distance of 200m or so) so it is subject to a lot of severe weather. The back of the house has exposed brickwork on the first floor and...

Hi, I have a couple of areas where the emulsion has peeled off part of the wall because the plaster wasn't sealed properly I think. I want to try to blend the smooth plastered part to the part with several coats of paint. I'm wondering if I can add a bit of pollyfiller or plasterboard adhesive...

Hi, Over recent years, I've had to paint several of our cast radiators (previous owners had sadly not made the best of jobs). Used white radiator wet spray but found that the Hammerite paint provides a better and longer lasting result. Need to tackle two more radiators but this time we want...

Hi after some advice on what paint would be best to use to paint our outside electric /gas meter boxes which have flaked a little. House is 5 years old so the meter boxes aren't to old, I think there fibreglass? I've seen dulux weathershield satin mentioned a few times but would I need to sand...

Hi there I'm looking into getting some uPVC sashes to replace old timber ones. Because I'm in a conversation zone - these will be Roseview at the front, and then Ecoslide at the rear. I'd like to have the anthracite painted versions - my current sashes are dark and I prefer this to white. But...

I decided to decorate the small box bedroom in my house as it had not been done for years! As a first step I stripped and sanded the bedroom door smooth with an electric sander after having to scrape some bits. The door I think is wood with a type of hardboard covering. The house was built in...

Knocked down a wall between attic room and corridor, and the Velux windows are different (one pine and one white). The white looks really out of place. Has anyone ever stripped a white Velux back to the wood? Is it a terrible idea?

Is there any way I can manage this problem? What should I do? Thanks for your time and I look forward to your response.

Hello! So decided to redecorate a bedroom ourselves. Removed wallpaper, scrubbed, sanded, cleaned, primed, skimmed and one coat of primer/undercoat. My issue is I have a few areas where I can see 'steps' from where I've skimmed, my fault for not sanding well enough in these areas. Can I use...

Hi, I need to bond and seal a piece of timber which is already over painted with a sikkens oils based paint to some bricks. Whats a decent sealant adhesive that will work on oil based paints? Is stixall any good and will it adhere to timber that has an oil based paint? Any advice and...

Hi, I’ve recently had a new bathroom installed and it’s pretty much finished bar the freshly plastered ceiling. I know I need to put on a mist coat first and paint over that with a specialist bathroom paint. What I’m not so clear on is what paint to use for the mist coat in a bathroom. Would...

Disclaimer: I'm not good with DIY at all, but lockdown and situations have forced us to do some stuff ourselves that we would normally contract out for. "Should have paid someone" isn't particularly helpful so I'll save your time writing in saying "I know" in advance. We've recently tried to...

Hi All, Had the house replastered recently. Due to bright white led downlights i could see imperfections. Anyways few rooms filled with easi fill and Tourpet decorators skim. Sanded them smooth. Wiped down the surfaces. Spot primed filled areas. Firstly with wateree down emulsion. Then zinsser...

Hello, I wonder if anyone can help with this. I have a radiator pipe that goes into the radiator, but just before that it splits off to a short terminated end that I assume would have been connected elsewhere long ago... this small end of pipe has some straggly 'thread' hanging off it. Perhaps...

Hi All. Looking at doing a spot of decorating ahead of Christmas and looking for paint recommendations. Current The walls are all Magnolia on plaster with White ceilings. What The lounge and hallway need to be painted totaling around 75m2 Requirements 1. The paint needs to be cleanable as we...

We’ve bought a new build And due to the amount of remedial work and quality of paint work, considering re doing the house. How much would you say it would cost DIY vs Labour Most areas are in good condition, just needs the odd sanding, undercoat and paint. Been looking at scrubbable matts...