Compression gland onto plastic conduit?
- Thread starter canduit
- Start date
Sponsored Links
Yes.
You fit a bush end onto the conduit, remove the bush and discard, and screw in gland.
Trying to thread plastic conduit would most likely just split it beyond use.
You fit a bush end onto the conduit, remove the bush and discard, and screw in gland.
Trying to thread plastic conduit would most likely just split it beyond use.
You can get non threaded glands which glue into a PVC conduit box outlet or coupling, but as the gland is nylon, you can't use solvent cement.
Normally you'd use a female coupler and screw a normal threaded gland into it.
Normally you'd use a female coupler and screw a normal threaded gland into it.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
