Concealed joints again!

That rather depends upon whether it's one containing acetic acid, doesn't it? There are one designed for 'electrical use' around.
Been there, seen that done to weatherproof RF connectors, wouldn't do it again even though the manufacturers picked up the tab for 2 riggers.
However, morq's point was obviously that the regs seem to be happy with any 'compound' :-)
 
OTOH, if it's just twin & earth under the floor/in a ceiling, and you're looking for a compliant solution, just bung in Wagos or Ideals etc, rather than faff about filling a screw terminal JB with Play-Doh or whatever.
 
OTOH, if it's just twin & earth under the floor/in a ceiling, and you're looking for a compliant solution, just bung in Wagos or Ideals etc, rather than faff about filling a screw terminal JB with Play-Doh or whatever.
Sure, in practice that's what one would do, if one were bothered about 'compliance'.

However, as I'm sure you understand, the reason I raised the issue was that I suddenly realised (after years of not thinking about this) that the regs really do seem to allow non-accessible screwed joints if one squirts some (unspecified) 'compound' into/over them!
 
OTOH, if it's just twin & earth under the floor/in a ceiling, and you're looking for a compliant solution, just bung in Wagos or Ideals etc, rather than faff about filling a screw terminal JB with Play-Doh or whatever.
I wouldn't use play-doh... it's conductive
 
Oh yes rodents love Play-Doh and coincidently so do small children
I imagine that's not quite a 'co-incidence', since I would presume that it's been deliberately formulated to be safe for small children to eat - particularly given that they will have a go at eating most things *(like soil!),even if they don't taste very nice :-)
 
Sticking with potted joints, as long as the potting compound (at least partially) surrounds the screw heads - then the screws cannot work loose. That only leaves creep - and I remain "unconvinced" thats a problem given the number of screwed joints in a typical house installation (manynof which get no routine inspections.)
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top