I have a Glow worm ultracom2 sxi with Climapro2RF and outdoor sensor. The original pipework from a vented system was adapted. Fitted in the depths of winter I have only now come to trying to turn it off. The problem is that the heating will not turn off!
I became suspicious that the thermostat was not working correctly, however low I turned the temp, the radiators came on. I then turned the Heating from programme to OFF and they still came on. At last when I turned the hot water programme off the Heating subsided.
Is it a problem with the controls, or have the pipes been mis-plumbed? The handset is definitely talking to the boiler, and the smart wiring centre appears to be functioning without error.
I am calling the installer asap but it would be good to get a few comments so that I am armed with some good searching questions!
Thanks for your input.
I became suspicious that the thermostat was not working correctly, however low I turned the temp, the radiators came on. I then turned the Heating from programme to OFF and they still came on. At last when I turned the hot water programme off the Heating subsided.
Is it a problem with the controls, or have the pipes been mis-plumbed? The handset is definitely talking to the boiler, and the smart wiring centre appears to be functioning without error.
I am calling the installer asap but it would be good to get a few comments so that I am armed with some good searching questions!
Thanks for your input.