Just got an ideal izar he35 and have replaced my conventional boiler with this new fangled combi.
removed the tank/powerflushed the system, replaced lots of burst rads when it pressurised,etc
I'm at the stage where i need to connect up the gas and go through the start up procedure.
Decided the best way would be to let a corgi registered person do it
as i do not know how to 'purge the air in the system using the approved techniques' or how to connect the gas
however having called a multitude of corgi registered plumbers and getting really arsey guys telling me that
'i have to be corgi registered to fit it'
or
'you will need 22mm pipe going to the boiler'
or
arranging times to turn up then not showing,
i'm getting a little fed up.
so my questions are :
What are the approved techniques to purge air in the system ?
and what do i need to connect the gas the ideal gas regulator ?
sorry for the long post !!
removed the tank/powerflushed the system, replaced lots of burst rads when it pressurised,etc
I'm at the stage where i need to connect up the gas and go through the start up procedure.
Decided the best way would be to let a corgi registered person do it
as i do not know how to 'purge the air in the system using the approved techniques' or how to connect the gas
however having called a multitude of corgi registered plumbers and getting really arsey guys telling me that
'i have to be corgi registered to fit it'
or
'you will need 22mm pipe going to the boiler'
or
arranging times to turn up then not showing,
i'm getting a little fed up.
so my questions are :
What are the approved techniques to purge air in the system ?
and what do i need to connect the gas the ideal gas regulator ?
sorry for the long post !!