Joist hangers

[bobsuerita]

most of the wide hangers we use are special order or made to order for glulams and kertos but plenty of shelf

https://www.joisthangers.co/welded_masonry_hanger_150_x_140mm.html

 

[magico]

Sorted now guys....went the eBay route.
What's the best way to bolt them all together.
Was thinking stainless screwed bar cut to length. Welded nut on 1 end and nylon nut and washer on other end. Timber connectors between joist

 

[Doggit]

You've no guarantee that the welded nut will hold, so a nylon nut and washer both sides would be better.

 

[magico]

Would they be in a straight line in middle every 600mm or staggered top bottom top bottom like. Using 12mm screwed rod.
Cheers guys

 

[Doggit]

Staggered top and bottom. But I'd still have gone with the 200x50's, and then only needed 2 joists. Less cost and hassle all round, and you've only lost 2 inches on the ceiling height.

 

[Mr Chibs]

Hi all I'm after a couple of 150×150 masonry joist hangers to buy online if anyone can point me in right direction. Much appreciated
Mark

Are you sitting down?

https://www.metrofixings.co.uk/main...Simpson-Strong-Tie-HJHM150150-140mm-x-150mm/1

Sorry wrong size...

 

[magico]

38 quid each....haha 4 off eBay for 20 quid mate..thanks anyway..