Hi
Got to work on Wylex board, none of my lock outs fit the main switch as its 30mm wide, any ideas please???
Got to work on Wylex board, none of my lock outs fit the main switch as its 30mm wide, any ideas please???
LOCK OUT FOR WYLEX MAIN SWITCH
- Thread starter lornaloo
- Start date
Sponsored Links
Sorry cant post pics, asked usual supplier and got the standard "no call for them mate" surely there must be!!!
KewTech KewLok?
Sponsored Links
Is it an NH range wylex CU?
Hi
Yes it is a NH board
Yes it is a NH board
The main switch has padlock holes on it
I did think of that but can't find one small enough
Electrifix do them next day del could be with you monday, yes they are open sat
Mk do a small diameter lock
For locking off there FCU's and fan isolaters.
Would that fit.
For locking off there FCU's and fan isolaters.
Would that fit.
Thanks for your replies guys, going to look now
What is the model number of the panel with the switch disconnector.
Check at the sides of the switch. There are probably wee holes on the vertical switchguard. These take the prongs of a lockout, in which you will put a padlock. Not sure the dimensions but an MCB lockout may or may not fit. You should be able to get an MCB lockout from a large electrical wholesaler. I say "should" but locking out is not a strong point of electrical contractors, who prfer to use bits of tape to protect themselves, colleagues and property so there may nt be damand for the wholesaler to stock . The main branches in cities are usually open Saturday mornings. Reece safety will do a lockout for just about anything.
Check at the sides of the switch. There are probably wee holes on the vertical switchguard. These take the prongs of a lockout, in which you will put a padlock. Not sure the dimensions but an MCB lockout may or may not fit. You should be able to get an MCB lockout from a large electrical wholesaler. I say "should" but locking out is not a strong point of electrical contractors, who prfer to use bits of tape to protect themselves, colleagues and property so there may nt be damand for the wholesaler to stock . The main branches in cities are usually open Saturday mornings. Reece safety will do a lockout for just about anything.
Thanks FrankE, thats a great help
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
