On looking at where I'm going to build a wall as part of an extension, I have an issue with an inspection chamber. As you can see on the diagram it currently sits in an ideal location at the intersection of the drains.
I intend to extend the kitchen out sideways (level with the kitchen wall) to incorporate the lean to and outbuildings which will at present build over the inspection chamber.
If I just move the inspection chamber straight backwards it will not be at the intersection of the drains thus prevent rodding.
Just for info, drain 2 will likely be removed.
Any ideas?
PS - image not uploading at present - will add when fixed
I intend to extend the kitchen out sideways (level with the kitchen wall) to incorporate the lean to and outbuildings which will at present build over the inspection chamber.
If I just move the inspection chamber straight backwards it will not be at the intersection of the drains thus prevent rodding.
Just for info, drain 2 will likely be removed.
Any ideas?
PS - image not uploading at present - will add when fixed