- Joined
- 24 Jan 2019
- Messages
- 13
- Reaction score
- 0
- Country
Hi there,
After a bit of advice basically on what I should be asking my electricity supplier.
I have 3 storage heaters that I've disconnected and sent on the way to scrap metal heaven.
These were connected to their own off peak distrbution board, Economy 7, using 3 number B16 MCB's.
In their place I have 3 new wifi controllable heaters. I would like to use the same switch that the 3 previous heaters were wired into. However as the storage heaters used to run off of E7 the electric to these is clearly limited to night time only.
My questions are:
Is this just a simple case of speaking to my electricity supplier and ask to switch to a standard tarriff and therefore the off peak distrubution board becomes live all day or do i need to get a electrician in to connect the boards together ? or something altogehter differnet...
many thanks
After a bit of advice basically on what I should be asking my electricity supplier.
I have 3 storage heaters that I've disconnected and sent on the way to scrap metal heaven.
These were connected to their own off peak distrbution board, Economy 7, using 3 number B16 MCB's.
In their place I have 3 new wifi controllable heaters. I would like to use the same switch that the 3 previous heaters were wired into. However as the storage heaters used to run off of E7 the electric to these is clearly limited to night time only.
My questions are:
Is this just a simple case of speaking to my electricity supplier and ask to switch to a standard tarriff and therefore the off peak distrubution board becomes live all day or do i need to get a electrician in to connect the boards together ? or something altogehter differnet...
many thanks