Can any one give me any information about a 10 year old Paxton door entry system. First question, the 12 Volt lead Acid battery, I assumed was to keep the system running or open the latch in the event of power failure. I am told not, but not what it is for.
next question, the internal 12 Volt Power supplies fail fairly often, is it possible the 12 V Lead Acid Batteries, are causing this issue, they are all between 3 and 5 years old with no record of replacement Date, but all read just over 12 volts with no load.
And the last question, on replacing a defective latch, I am told their is some voltage adjustments on the Control PCB to do, but not what they are.
Any info would be much appreciated.
next question, the internal 12 Volt Power supplies fail fairly often, is it possible the 12 V Lead Acid Batteries, are causing this issue, they are all between 3 and 5 years old with no record of replacement Date, but all read just over 12 volts with no load.
And the last question, on replacing a defective latch, I am told their is some voltage adjustments on the Control PCB to do, but not what they are.
Any info would be much appreciated.