The ceiling in my bathroom is tung and groove with 3 downlighters and a pull cord switch
There is a 4-inch fan connected to a switched fuse spur, which I have ascertained with a continuity test.
However it lacks a supply, which I assume was disconnected when the downlighters were installed.
To rectify this is it a simple matter of finding the end of the line and running a bit of 1.5 from this to the spur?
There is a 4-inch fan connected to a switched fuse spur, which I have ascertained with a continuity test.
However it lacks a supply, which I assume was disconnected when the downlighters were installed.
To rectify this is it a simple matter of finding the end of the line and running a bit of 1.5 from this to the spur?