- Joined
- 10 Oct 2023
- Messages
- 2
- Reaction score
- 0
- Country
I've just had my house plastered and got the old sockets replaced with screwless sockets by an electrician. At worst some of them have revealed a lot of messy plastering that will need to be filled in and at best they have a gap around them and are not flush with the wall.
I can't tell if they are just smaller than what was there before or if the fitting is not quite right. Any advice on whether it can be fixed with filler or if replacement sockets and switches are needed would be much appreciated.
Thank you
I can't tell if they are just smaller than what was there before or if the fitting is not quite right. Any advice on whether it can be fixed with filler or if replacement sockets and switches are needed would be much appreciated.
Thank you