Socket stuck fast in spark plug well!!!

Joined
29 Aug 2011
Messages
44
Reaction score
2
Location
Suffolk
Country
United Kingdom
Hi all,

I wonder if anyone can help with clever techniques... some relatives were replacing the spark plugs on a Golf and as they tried to remove the old plug the socket became stiff in the well. They persisted, thinking that it would free itself but it just bound tighter and tighter. It's now stuck rock-solid in the well. We don't know if the plug is still threaded or if it's come out. It has certainly come out part way but we don't know if its threads are free of the cylinder head threads.

Anyone known this to happen? Any ideas of what to do?

I've replaced the top end of a Zetec engine in the past and done loads of motorcycle maintenance - so not entirely new to spinning spanners. I wasn't there at the time but my guess is that the socket was somehow scraping the inside wall of the well and removed enough material that has now filled the space between the socket and the well, jamming it solid. That's just my guess.

We tried to get a grip on the socket and just drift it up out of the well (slide-hammer style) but it's stuck in too tight. I cut a piece of wood and inserted it into the square fitting of the socket and then screwed a big wood screw into it - trying to get a firm grip like a wall plug in a wall. It just wasn't strong enough. Nothing else we tried worked either. We have ordered a couple of tools that should get a better grip on it but they won't come for a day or two.

Meanwhile... any better explanations as to what's happened? Seen it before? Any clever tips on what to do??

Many thanks!!
 
I've had plug sockets tighten in the plug well but nothing that wouldn't free with some judicious waggling.
Try spraying some releasing agent (proper stuff ie Duck Oil etc not WD40) & try to work the socket L & R with a heftier ratchet or long T bar.
 
As above, it's the only option you have.
You may get some idea by measuring the depth of the other wells and another plug socket to see if the plug is in or out but it's a bit of a long shot.
I think I'd try tapping the socket down a bit, maybe a tiny movement may free it.
Be lucky, and not too heavy handed. Let's know how you get on!
John
 
If the socket is worn and a bit loose, it may jam and can be loosened by turning it slightly the other way.

I think some light vibration or tapping, while pulling, should loosen it. I would hesitate to tap it downward.

If you rattle it side ways, it will probably loosen. You may break the top of the plug, but that's the least of your problems.
 
I have come across this before - fortunately I baled out before it got too serious.
The reason for this is that the plug well and the plug thread aren't exactly concentrically bored......they don't have to be so long as the socket is slim enough.
In my case I ground the socket down, and eventually came across a slim type.
It does seem that the socket has to go down into the well before it will release it's grip so hopefully the plug will not cross thread (most unlikely).
I do hope this has a happy outcome!
John :)
 
Back
Top