- Joined
- 31 Aug 2019
- Messages
- 11
- Reaction score
- 1
- Country
Hello everyone, hope someone can offer some advice on what is causing Fuel not reaching the Combustion chamber.
Filled up with new Fuel, drained out all the old fuel from Tank, Pipe, and Carb.Removed all the Jets and cleaned them out but they all seemed to be clear.Cranked it over a few times and no start, so removed Plug to see if the Plug had Fuel on it and it was totally dry,so put a small amount of Fuel in Spark Plug hole,cranked it over and it fired up and run for a couple of seconds till it had burnt the added Fuel, so can anyone tell me what would be stopping the Fuel reaching the Chamber, would appreciate any advice offered, thank you for looking.
Filled up with new Fuel, drained out all the old fuel from Tank, Pipe, and Carb.Removed all the Jets and cleaned them out but they all seemed to be clear.Cranked it over a few times and no start, so removed Plug to see if the Plug had Fuel on it and it was totally dry,so put a small amount of Fuel in Spark Plug hole,cranked it over and it fired up and run for a couple of seconds till it had burnt the added Fuel, so can anyone tell me what would be stopping the Fuel reaching the Chamber, would appreciate any advice offered, thank you for looking.