Hi
We are planning to connect up our summerhouse soon and wondered if this kit is fine we are going to get it in place before the install:
Cable:
6mm 3core SWA 16m from summerhouse to inside wall of bungalow
6mm T&E 5m from SWA to bungalow consumer on a 40 amp MCB non rcd side
Extra 4mm earth wire for the T&E from adaptable box to CU of bugelow
SWA convert to T&E:
The cable will be joined with a Galvannised adaptable box using 60a block connectors or yellow butt crimps on inside wall of spare room. The extra 4mm earth is because the earth in T&E is 2.5mm
Summerhouse consumer:
A metal clad 4 way CU to take the swa
100amp DP switch
32amp RCBO for sockets
6A MCB for lights
Does this all sound fine? Thanks very much!
We are planning to connect up our summerhouse soon and wondered if this kit is fine we are going to get it in place before the install:
Cable:
6mm 3core SWA 16m from summerhouse to inside wall of bungalow
6mm T&E 5m from SWA to bungalow consumer on a 40 amp MCB non rcd side
Extra 4mm earth wire for the T&E from adaptable box to CU of bugelow
SWA convert to T&E:
The cable will be joined with a Galvannised adaptable box using 60a block connectors or yellow butt crimps on inside wall of spare room. The extra 4mm earth is because the earth in T&E is 2.5mm
Summerhouse consumer:
A metal clad 4 way CU to take the swa
100amp DP switch
32amp RCBO for sockets
6A MCB for lights
Does this all sound fine? Thanks very much!