Can anyone please help with my new alarm. l have a total of 3 keypads, 1- keypad at the side of the 64w panel upstairs, and 2- keypads downstairs, all 3 are wired back to the panel .l can only have 1 keypad working at any one time. when l "confirm devices" only 1 keypad is showing.The 2 downstair pads only work, if they are connected to the panel individualy, and they have been addressed correctly.The keypads light up , and display the panel faults, but will not accept a engineers code , l cannot find on any of the forums, where anyone has had the same problem.
Texecom 64w panel.
1- LCD WIRED KEYPAD .
2- " " FMK KEYPADS
2 PIR.
1- ODYSSEY BELL.
Texecom 64w panel.
1- LCD WIRED KEYPAD .
2- " " FMK KEYPADS
2 PIR.
1- ODYSSEY BELL.