Hi guys (and girls)
Im fitting my kitchen at the mo, done the electrics myself (and has been checked by an electrican and has passed inspection
One thing i wanted to check up on was the correct or preferred method for connecting under counter built in appliances.
I have planned in for 2 above worktop 13a fused switches to control/isolate the fridge and freezer respectively. Each one feeds a single unswitched socket located in an adjacet cupboard.
So, my query is that obviously by plugging in an appliance to these under counter sockets will result in the said appliance having two fuses!
Have thought that by changing the unswitched socket to a flex outlet would resolve that but have also heard that changing the switch to a 20a DP and leaving the socket with 13a plug would be ok.
Advice welcome on the best / most appropriate wat to proceed .
Im fitting my kitchen at the mo, done the electrics myself (and has been checked by an electrican and has passed inspection
One thing i wanted to check up on was the correct or preferred method for connecting under counter built in appliances.
I have planned in for 2 above worktop 13a fused switches to control/isolate the fridge and freezer respectively. Each one feeds a single unswitched socket located in an adjacet cupboard.
So, my query is that obviously by plugging in an appliance to these under counter sockets will result in the said appliance having two fuses!
Have thought that by changing the unswitched socket to a flex outlet would resolve that but have also heard that changing the switch to a 20a DP and leaving the socket with 13a plug would be ok.
Advice welcome on the best / most appropriate wat to proceed .