hive

Hi all Installing a hive in replacement of our antique Honeywell St699. Just wanted to check regarding the wiring of the thermostat to bridge it. Am I right in thinking yellow wire needs to join blue to complete the circuit? IMG_20191003_140921 by Thematrix12 posted 3 Oct 2019 at 2:45...

Just added some Hive TRV valves to my Hive system the other day, and noticed I could not control them from the Hive website at https://my.hivehome.com/ like I could with the mobile app. Below is what I get: Clicking on a TRV... Hive-TRV-Dashboard by eveares posted 18 Sep 2019 at 10:31 PM...

Hi guys, Hoping I can sort this out without bringing in a tradesman.... I'll try to include as much info as possible. I have a Suprima boiler and Hive thermostat which I installed soon after moving into my new house, the whole system worked well over the winter for both CH and HW. The system...

Good evening to all, Need a bit of help on installing a Hive Active Heating Thermostat, or to be more precise fixing a very sloppy work by a "cowboy" electrician at a friends house. So here we go. System comprises of: (1) Trianco Aztec Boiler (2) Separate hot immersion heating water tank (3)...

I have installed Hive to our Y plan central heating system but the HW, pump and boiler seems to be on permanently. I have attached a picture of the wiring centre. Could anyone help me trouble shoot please? We have a cold header in the attic. I have not used a HW off in my wiring, not sure if...

I have an analog heating programmer beneath my boiler (Ideal MiniS24). There are two wires going into terminal 1 and two wires terminal 2: live input and a live out (to the motorised valves upstairs) and same with neutral. Terminals 5 & 6 are powered out to the boiler. (attached a picture of...

hi, in October last year I fitted Hive against my Potterton Suprima boiler and it seemed all was fine. Following guidance from this site i thought i had it done. Now summer is here and I no longer need heating I’ve notice my water doesn’t get hot even though the light on the controller indicates...

Hello back in December I fitted a hive with my ICOS HE12 boiler. It seemed to be working well until the weather improved and I turned the heating off. At this point when the hot water fired up the radiators got warm yet the hot water didn't. I tried swapping the CH off and HW off wires which...

Hi all, I'm hoping someone can help identify the wires under the combi boiler. There was once hive installed however the previous owner has taken the reciever and install a standard danfoss thermostat. This is how it has been left. 15543993042235156073894454745445 by Matt Bezant posted 4 Apr...

Evening all I have the Hive thermostat on order and should be here tomorrow. I currently have a Salus RT300RF wireless thermostat which i will be replacing. The boiler is a viessmann vitopend 100 combi The current wiring on the Salus receiver is:- COM - Grey wire and brown loop NO - Black...

Idle curiosity really- has anyone ever done the sums to see how long the things take to repay their cost by reducing the heating bills/making the home more comfortable I can see the theoretical attraction but not sure about the actual. For instance, most of the year I'm at home on a normal...

Hi, Brand new worcester bosch installed two days ago with hive controller. Turns on as per schedule in the morning but then does not turn off at all unless done manually using the boiler controls. Installer says hive is working fine as is the boiler and the fix requires a new 'suppressor'...

Hello, I am trying to replace an old Honeywell T6360 dial thermostat with a Hive single channel link. I have an Alpha CB2028 gas combi boiler fitted with the optional clock timer...

Thanks in advance for any help I'm installing hive as per instructions on an older thread. The stat had two wires connected, and a third I'm assuming is neutral that wasn't connected. Connected the hive backplate including the li k between live and the first pin, but reciever doesnt come on when...

Hi I am looking at possibly upgrading our existing system with Hive, Tado or similar. Hive is my current preferred option as I have seen a good deal on an approved re-sellers website. Our current system is a two zone using TP5000 controllers. We have a Gledhill Boilermate SP and GB20 boiler...

Hi all I’ve got a receiver fitted on to a the boiler and purchased a hive 2 thermostat and hub 360. The thermostat won’t connect to the receiver even when I reset the receiver so it is flashing Amber. Called hive and they said maybe a compatibility issue with the boiler. Has anyone got a...

Just bought hive active heating and hot water pack. Currently have what I believe is gravity system ‘Y’ type. Boiler, hot water tank, 3 way valve, room stat, tank stat and programmer. Instructions state ‘dual channel required for boilers with hot water tank’. Dual channel wiring diagram in...

Hi all, I'm after some assistance in wiring up my new Hive Active Heating Thermostat (with single channel receiver). My current setup consists of an old heating timer, connected to my Worcester 24i Junior combi boiler. I don't currently have a thermostat. I've tried to draw a wiring diagram...

Hi I've bought a Hive receiver & theromostat with dual HW & CH controls to replace the existing Drayton HW & CH timer control and wired thermostat. I tried to set it all up last weekend and everything was going well until I tried to replace the thermostat. I set up the hive hub, changed the...

I've searched a lot for the answer to this question, so I thought I'd open it up here to see if anyone know how Hive actually works. I already have a Hive hub, and I'm now planning on using hive to control my heating. I only need to control heating as hot water is on demand (i.e there's no hot...